Definitions for prony brake
prony brake

WikipediaRate this definition:0.0 / 0 votes

1. Prony brake

   The Prony Brake is a simple device invented by Gaspard de Prony in 1821 to measure the torque produced by an engine. The term "brake horsepower" is one measurement of power derived from this method of measuring torque. (Power is calculated by multiplying torque by rotational speed.)Essentially the measurement is made by wrapping a cord or belt around the output shaft of the engine and measuring the force transferred to the belt through friction. The friction is increased by tightening the belt until the frequency of rotation of the shaft is reduced to a desired rotational speed. In practice more engine power can then be applied until the limit of the engine is reached. In its simplest form an engine is connected to a rotating drum by means of an output shaft. A friction band is wrapped around half the drum's circumference and each end attached to a separate spring balance. A substantial pre-load is then applied to the ends of the band, so that each spring balance has an initial and identical reading. When the engine is running, the frictional force between the drum and the band will increase the force reading on one balance and decrease it on the other. The difference between the two readings multiplied by the radius of the driven drum is equal to the torque. If the engine speed is measured with a tachometer, the brake horsepower is easily calculated. An alternate mechanism is to clamp a lever to the shaft and measure using a single balance. The torque is then related to the lever length, shaft diameter and measured force. The device is generally used over a range of engine speeds to obtain power and torque curves for the engine, since there is a non-linear relationship between torque and engine speed for most engine types. Power output in SI units may be calculated as follows: Rotary power (in newton-meters per second, N·m/s) = 2π × the distance from the center-line of the drum (the friction device) to the point of measurement (in meters, m) × rotational speed (in revolutions per second) × measured force (in newtons, N).Or in English units: Rotary power (in pound-feet per second, lbf·ft/s) = 2π × distance from center-line of the drum (the friction device) to the point of measurement (in feet, ft) × rotational speed (in revolutions per second) × measured force (in pounds, lbf).

The Standard Electrical DictionaryRate this definition:0.0 / 0 votes

1. Prony Brake

   A device for measuring the power applied to a rotating shaft. It consists of a clamping device to be applied more or less rigidly to the shaft or to a pulley upon it. To the clamp is attached a lever carrying a weight. The cut shows a simple arrangement, the shaft A carries a pulley B to which the clamp B1 B2 is applied. The nuts C1 C2 are used for adjustment. A weight is placed in the pan E attached to the end of the lever D. The weight and clamp are so adjusted that the lever shall stand horizontally as shown by the index E. If we call r the radius of the pulley and F the friction between its surface and the clamp, it is evident that r F, the moment of resistance to the motion of the pulley, is equal to the weight multiplied by its lever arm or to W*R, where W indicates the weight and R the distance of its point of application from the centre of the pulley or r*F = R*W. The work represented by this friction is equal to the distance traveled by the surface of the wheel multiplied by the frictional resistance, or is 2*PI*r*n*F, in which n is the number of turns per minute. But this is equal to 2*PI*R*W. These data being known, the power is directly calculated therefrom in terms of weight and feet per minute.

How to pronounce prony brake?

1. Alex

   US English

   David

   US English

   Mark

   US English

   Daniel

   British

   Libby

   British

   Mia

   British

   Karen

   Australian

   Hayley

   Australian

   Natasha

   Australian

   Veena

   Indian

   Priya

   Indian

   Neerja

   Indian

   Zira

   US English

   Oliver

   British

   Wendy

   British

   Fred

   US English

   Tessa

   South African

How to say prony brake in sign language?

Numerology

1. Chaldean Numerology

   The numerical value of prony brake in Chaldean Numerology is: 8

2. Pythagorean Numerology

   The numerical value of prony brake in Pythagorean Numerology is: 8

References

1. ^ Wikipedia
   https://en.wikipedia.org/wiki/Prony_Brake
2. ^ The Standard Electrical Dictionary
   https://www.gutenberg.org/cache/epub/26535/pg26535-images.html#:~:text=prony brake